Product Operation Manual MSHRC080W Network IP Camera Microseven Systems, Inc.
Microseven® MSHRC080W IR Network IP Camera -2- First Edition (April 2008) Copyright Notice Copyright © 2002-2008 Microseven Systems, Inc. All Rights Reserved. Microseven Systems, Inc. provides this operation manual “as is” without warranty of any kind, either express or implied, including, but not limited to the implied warranties of merchantability and fitness for a particular purchase. Microseven Systems, Inc.
Microseven® MSHRC080W IR Network IP Camera -3- Notes: Please read the following label before connecting or operating the equipment. Notes: Notes： Please Please not move move the the cover cover (or (or back) back)toto reduce reduce the danger of electric part the danger of electric shock. shock. No partNoinside inside can be repaired by users. Refer can be repaired by users. Refer servicing to servicing to qualified personnel.
Microseven® MSHRC080W IR Network IP Camera -4- Contents 1. Preface ………………………………………………………………………………… 5 2. Key Features ………………………………………………………………………………… 5 3. Notes …………………………………………………………………………………………… 6 4. Instructions of Main Parts 5. Connections ………………………………………………………….…… 7 …………………………………………………………………………………. 7 6. Installation …………………………………………………………………………………………… 9 7. Basic System Diagram and Operating Circumstance 8. Specification 11 …………………………………………………………………..……………… 11 9.
Microseven® MSHRC080W IR Network IP Camera -5- 1. Preface MSHRC080W Network IP cameras adopts SONY CCD, with bright and exquisite images. As video & audio multi-media equipment that based on network transmission, which adopts built-in and multi-media communication technology, the camera is a multi-media network terminal that can directly connect to the network.
Microseven® MSHRC080W IR Network IP Camera -6- 3. Notes A. Do not attempt to disassemble the camera yourself. To prevent electric shock, do not remove screws or covers. No part inside can be repaired by users. Ask a qualified service person for serving. B. Handle the camera with care. Avoid striking or shaking. The camera could be damaged by improper handling or storage. C. Wireless model does not support waterproof. D. Do not use strong or abrasive detergents when cleaning the camera body.
Microseven® MSHRC080W IR Network IP Camera -7- 4. Instructions for Main Parts ⑦ ⑧ ⑥ 43 21 ⑤ NI ④ 2 1 ② TUO 11 ③ ① 12 ⑨ ① Network connector ② Video output terminal ③ Alarm input/output cable ④ Audio input terminal (black) ⑤ Power supply terminal ⑥ RS485 port ⑦ Shell ⑧ Shield ⑨ LED panel ⑩ Lens 5. Connections 5.1 Power Supply Connection 5.2 Video Output Connection © 2002-2008 Microseven Systems, Inc. All Rights Reserved.
Microseven® MSHRC080W IR Network IP Camera -8- 5.3 Audio Input Connection 5.4 Alarm Connection Alarm cable: Green cable: passive alarm input A Brown cable: passive alarm input B Red cable: passive alarm output A Purple cable: passive alarm output B 5.5 Network Port Connection 5.6 RS485 Communication Port Connection © 2002-2008 Microseven Systems, Inc. All Rights Reserved.
Microseven® MSHRC080W IR Network IP Camera 5.7 Connection Mode of RJ45 ● RJ45 network cable ● Ultra-five cable ● Recommended maximum length: 80mm 6. Installation 6.1 Preparation ● Check product packing and if any accessories missing. ● Select proper installing position with enough bearing, such as surface of concrete wall or metal bracket. 6.2 Outdoor Wall Installation 6.3 Installation Steps: Step 1. Preparation Select wall or hang installing brackets. a.
Microseven® MSHRC080W IR Network IP Camera - 10 - Note: Please consult with expert about weight bearing capacity of installation surface and structure. If the bearing capacity is not enough, the camera may drop and damage. Please refer to weight of camera in specification sheet. b. Prepare hardware which will be used on installing surface, e.g. nut or fixing bolt, etc. Step 2. Installing bracket Install bracket on installing surface by using bolts, which come with product.
Microseven® MSHRC080W IR Network IP Camera - 11 - Bracket under camera Loosen the two fixing bolts, remove the installing adapter from top of camera and install it under the camera, then install camera on bracket. Note: Install adapter by using the original two bolts, bolt with too large length may damage internal parts. " ① is 3-inch plastic hose. During installation one 3-inch plastic hose need to be used outside the connection cables.
Microseven® MSHRC080W IR Network IP Camera - 12 CIF: 352 * 288 (PAL), 352*240 (NTSC) H-D1: 720 x 288 (PAL), 360*480 (NTSC) D1: 720 x 576 (PAL), 720*480 (NTSC) Alarm Audio IR Frame rate Max: 25fps(PAL), 30fps(NTSC) Bit Stream 100Kbps ~ 3Mbps，CBR/VBR adjustable LOGO overlay Support character and time overlay on image Alarm function Support 1 channel alarm input/output Audio Input 1channel, RCA interface, microphone or other audio input, single track Audio Sampling Rate 8KHz Audio Sampling Rat
Microseven® MSHRC080W IR Network IP Camera - 13 - " Q: System operation could not be activated, the power indicator does not light. A: Check if the power is connected, and if the input voltage is normal. " Q: Network indicator does not light and cannot login the system. A: Check if the network is connected, and if the net line is inserted properly. " Q: Unable to upgrade or failed in upgrade.
