User`s manual
9
9. Cable Connection Parameter
100Base-X network allows 512-bit time delay between any two node-stations in a
collision domain. Switch-based Media Converter breaks up TP and Fiber segments’
collision domain to extend the cabling distance.
TP Cable Limitations: Cat. 5 and up to 100m
Converter Fiber Cable Limitations:
SC/ST Converter Models
Multi-mode Half-duplex
412m
Multi-mode Full-duplex
2Km
Single-mode Half-duplex
412m
Single-mode Full-duplex
15Km
10. TP-Fiber Technical Specifications
•
Standards
:IEEE802.3u 10/100Base-TX, 100Base-FX
• UTP Cable
:Cat. 5 cable and up to100m
Fiber Cable
:
50/125, 62.5/125 or 100/140µm multi-mode
8.3/125, 8.7/125, 9/125 or 10/125µm single-mode
• LED Indicators :
POWER, TP LNK/ACT, 100, FX LNK/ACT, FDX/COL
• Data Transfer Rate :
Speed
Forwarding Rate
100Mbps
148,800 PPS
10Mbps
14,880 PPS
• Flow Control: IEEE802.3x compliant for full-duplex
Backpressure flow control for half-duplex
• Power Requirement
: 1A@+5VDC above AC-DC Adapter
0
°
to 50
°
C (Commercial)
:
1A@+5VDC above AC-DC Adapter
0
°
to 60
°
C (Industrial)
•
Ambient Temperature
: 0
°
to 50
°
C (Commercial)
: 0
°
to 60
°
C (Industrial)
• Humidity : 5% to 90%
• Dimensions : 26.2(H) × 70.3(W) × 94(D) mm
• CE Mark
Note: For connecting this device to Router, Bridge or
Switch, please refer to the corresponding device's
Technical Manual.