User Guide

DisplayPort Tx IP Configuration
Microsemi Proprietary and Confidential UG0935 User Guide Revision 2.0 14
[3] IntMask_HPD_IRQ RW 0x1 Interrupt mask for HPD IRQ. 1 enable
interrupt
[2] IntMask_AuxReplyTimeOut RW 0x1 Interrupt mask for AUX Reply Timeout. 1
enable interrupt
[1] IntMask_NewAuxReply RW 0x1 Interrupt mask for received AUX Reply. 1
enable interrupt
[0] IntMask_AuxTxDone RW 0x1 Interrupt mask for AUX Request
transmission done. 1 enable interrupt
0x0188 [16] Int_total RC 0x0 Interrupt: total interrupt
[5] Int_HPD_Disconnect RC 0x0 Interrupt: HPD disconnect event
[4] Int_HPD_Connect RC 0x0 Interrupt: HPD connect event
[3] Int_HPD_IRQ RC 0x0 Interrupt: HPD IRQ
[2] Int_AuxReplyTimeOut RC 0x0 Interrupt: AUX Reply Timeout
[1] Int_NewAuxReply RC 0x0 Interrupt: Received new AUX Reply
[0] Int_AuxTxDone RC 0x0 Interrupt: Transmission of AUX Request is
done
Table 6 • DisplayPort Tx IP Registers (continued)
Address Bits Name Type Default Description