User Guide
Table Of Contents
- Introduction
- 1 – MSS Configurator
- 2 – SmartDesign and MSS Configurator Actions
- 3 – Configuring the DDR_FIC Sub-System
- 4 – Configuring the SMC_FIC Sub-System
- 5 – Configuring the FIC Sub-Systems
- 6 – Configuring the FIC Sub-System Clocks
- 7 – Configuring the FIC Sub-System Reset
- 8 – Configuring the System Memory Map
- A – Product Support
27
7 – Configuring the FIC Sub-System Reset
To configure the FIC Sub-System Reset:
1. From the MSS Configurator, configure the MSS Reset sub-block to expose the
MSS_RESET_N_M2F port.
2. Connect the MSS_RESET_N_M2F port to all FPGA fabric FIC sub-systems reset ports.
Figure 7-1 • Configure the MSS Reset Sub-Block