User`s manual

Quadrus EZ Reader User’s Manual 13-5
Unique Item Identifiers
UII Mode by Serial Command
UII Disabled
No UII is constructed when symbol data is read.
UII Enabled with Pass Through
UII-Only Enabled
UII Mode Error Messaging
Important: When Error Messaging is disabled, any symbol with data that does not conform
to UII format will be treated as a NOREAD.
Serial Cmd: <K455,status,errstatus>
Default: Disabled
Options: 0 = Disabled
1 = UII Enabled with Pass Through
2 = UII-Only Enabled
Usage: Use when symbols may contain either non-UII data or UII data.
Definition: Message streams with valid UII compliance indicators will be evaluated
as UIIs. All other data will be processed in the normal manner.
Usage: Use when symbols will contain only UII data, or when symbols with
non-UII data are to be rejected.
Definition: All data will be treated as potential UII data and symbols that do not
comply with DoD UII guidelines will be rejected.
Serial Cmd: <K455,status,errstatus>
Default: Disabled
Options: 0 = Disabled
1 = Enabled
Usage: Identifies problems with data in UII format.
Definition:
Evaluates the UII elements and returns an error message if invalid UII
elements are found.