User`s manual

Communications
Save
Settings
Default
to USB
Default
to PS/2
Clear
All Data
Clear
XML
Rules
MS-Q Imager User’s Manual 4-15
Connecting via RS-232 with a USB Bluetooth Modem
In some applications, it may become necessary to connect to a host via RS-232 using a
USB Bluetooth Modem. The following steps allow you to convert a USB Bluetooth connection
to RS-232.
1. Plug the USB cable into the Bluetooth Modem and the
host computer’s USB port.
Important: You must use a charged MS-Q battery for
this procedure to work properly.
2. Read the Quick Connect Code on the top label of the
Bluetooth Modem.
You will now be able to decode and send data to a program
in the host computer that can receive and display data.
3. Read the RS-232 Bluetooth Mode symbol and then
the Save Settings symbol at the bottom of this page.
4. Plug the Bluetooth Modem into an RS-232 connector
and power supply.
5.
Open a terminal program and connect using the following
port settings:
Baud = 9600
Parity = None
Stop Bits = One
Data Bits = Eight
Flow Control = None
6. Read the symbol below to return to USB Bluetooth Mode, and then read the Save
Settings symbol at the bottom of this page.
RS-232 Bluetooth Mode
USB Bluetooth Mode