User`s manual

Communications
Save
Settings
Default
to USB
Default
to PS/2
Clear
All Data
Clear
XML
Rules
MS-Q Imager User’s Manual 4-13
Out-of-Range Notification
This feature allows you to set the imager to beep or vibrate when the Bluetooth radio is out
of range. Read the symbols below to set the desired Out-of-Range Notification profile.
Auto-Save Last Bluetooth Address
If the MS-Q is saved in the proper RF communication mode, enabling Auto-Save will
allow the imager to automatically save the last device to which it was connected. This
eliminates the need to Save Settings after reading the Quick Connect Code.
Enable Out-of-Range Beep
Enable Out-of-Range Vibrate
Enable Out-of-Range
Beep and Vibrate
Disable Out-of-Range Notification
(Default)
Default RF
Disable Auto-Save (Default)
Enable Auto-Save
Default RF