User`s manual

Communications
Save
Settings
Default
to USB
Default
to PS/2
Clear
All Data
Clear
XML
Rules
MS-Q Imager User’s Manual 4-7
Parity (RS-232)
Parity is an error detection routine in which one data bit in each character is set to 1 or 0
so that the total number of 1 bits in the data field is even or odd. It only needs to be
changed if necessary to match the host setting.
Stop Bits (RS-232)
Stop Bits are added to indicate the end of each character. This setting should only be
changed if necessary to match the host setting.
Data Bits (RS-232)
Data Bits are the total number of bits in each character. This setting only needs to be
changed if necessary to match the host setting.
Timeout Settings (Cabled)
This feature sets the amount of time a cabled MS-Q will be enumerated before entering
Sleep Mode in order to charge the battery more quickly.
None (Default)
Odd
Even
2 Stop Bits (Default) 1 Stop Bit
8 Data Bits (Default)
7 Data Bits
Cabled Timeout -
Never (Default)
Cabled Timeout -
2 Hours (Default)