User`s manual

RS-232 Interface
Save
Settings
Default
to USB
Default
to PS/2
Clear
All Data
Clear
XML
Rules
4-6 MS-Q Imager User’s Manual
RS-232 Interface
Enabling either of these modes will disable USB or PS/2 communications and require you
to default the imager or read the “USB Keyboard” symbol to return to USB.
See RS-232 Interface on page 1-8 for detailed steps on setting up the RS-232 Interface.
RS-232 Default Settings Mode
This mode is the standard way of transferring unformatted, unpacketized data through the
RS-232 port.
You will need to read this symbol whenever you set up RS-232 communications.
Baud Rate (RS-232)
Baud Rate is the rate at which the imager and host transfer data. It only needs to be
changed if necessary to match the host setting.
1200
2400
4800
9600
19.2K
38.4K
57.6K (Default)
115.2K
Save Settings