User`s manual

2-4 MS-Q Imager User’s Manual
Tree Controls
Tree Controls
To make changes to configuration settings in the tree control menus:
The imager must be in one of the modes below to communicate with ESP.
1. Left click on the +/-
to expand or collapse
the tree.
4. Left click again on the open screen to complete the
selection.
5. Right click on the open screen and select Save to
Reader to implement the command in the imager.
2. Double click on
the parameter and
click once in the
selection box to
view options.
3. Place your cursor
in the selection
box, scroll down to
the setting you
want to change
and click once on
the setting.
USB
Connect
Mode
RS-232
Connect
Mode
USB
RS-232