User`s manual

Quick Start
MS-Q Imager User’s Manual 1-11
Install ESP
ESP Software can be found on the Microscan Tools CD that is packaged with the MS-Q.
1. Follow the prompts to install ESP from the CD.
2. Click on the ESP icon to run the program.
Note: ESP can also be installed from the Download Center at www.microscan.com.
ESP System Requirements
• 166 MHz Pentium processor (recommended)
• Windows Vista, XP, or 2000 operating system
• Internet Explorer 5.0 or higher
• 64 MB minimum RAM
• 40 MB minimum disk space
Important: The imager must be in one of the modes below to communicate with ESP.
USB
Connect
Mode
RS-232
Connect
Mode
USB
RS-232