User`s manual

Quick Start
MS-Q Imager User’s Manual 1-5
To assemble the MS-Q Imager with Original Handle (H1):
1. Slide the imager into the handle’s cradle. Be sure the tabs fit into the grooves along
the sides of the imager and that the handle’s 8-pin DIN connector inserts completely
into the back of the unit.
2. Plug the USB, PS/2, or RS-232 cable into the bottom of the handle. Plug the other end
of the cable into the appropriate port on your host computer.
Grasp the connection
housing and pull to
remove. Do not pull
directly on the cable.