User`s manual

7-18 MS-Q Imager User’s Manual
Continuous Operations
Continuous Operations
Continuous Read
Read any of the following symbols to enable or disable Continuous Read features.
Note: Continuous Read modes are only recommended for short term use because of
battery consumption. See Sleep Mode Timeout on page 4-12.
Continuous Read, Sleep Timeout
Cabled
Read one of the symbols below to set the amount of time the cabled imager will operate in
Continuous Read before entering Sleep Mode.
Uncabled
Read one of the symbols below to set the amount of time the uncabled imager will operate
in Continuous Read before entering Sleep Mode.
Near and Far Field
Near Field Only
Far Field Only
Continuous Read Off (Default)
Cabled - 2 Hours
Cabled - Always On (Default)
Uncabled - 5 Minutes (Default)
Uncabled - 15 Minutes
Uncabled - 30 Minutes