User`s manual

MS-Q Imager User’s Manual 7-15
Advanced Operations
Trigger Optimization by ESP
You can use ESP’s Imager view to set operation parameters for the handle trigger and
both buttons.
ESP Optimization Matrix
Single click the
Imager button to
begin.
Choose which trigger or button to
optimize from this dropdown menu.
Each button corresponds with a
setting on the Optimization
Guide matrix (page 7-7).
The Configuration
Status display shows
current settings for
each trigger or button.
Note: VGA Fast Processing settings B3 , C3 , and D3 are shown here when a Rev 5 (or earlier)
MS-Q model is connected. VGA settings are not supported in Rev 6 MS-Q models.