User`s manual

6-14 MS-Q Imager User’s Manual
LightRay Optics
LightRay Optics by ESP
The MS-Q Imager can also be configured and optimized for LightRay operation using ESP.
Click on the series you are using. You can
either use the radio buttons (“100 Series” and
“200 Series”) or click directly on the pictures.
The image of the selected model will glow, as
shown in the example below.
(200 Series selected)
Configure the handle
trigger or left and right
buttons with VGA Fast
Read (if Rev 5 hardware
or earlier) and Laser
Target options.
Send LightRay settings to the
imager, or Send and Save all
settings.
Enable or disable UII
functionality. (See UII
Mode Settings by ESP
on page 10-5.)
Choose the
field of view
and resolution
that match
your LightRay
Optics model.
Only available
for Rev 5
hardware or
earlier.