User`s manual

MS-Q Imager User’s Manual 6-5
I/O Parameters
MS-Q Operational Feedback
Left / Right Top LEDs
When not active, the MS-Q will flash battery or power
status every 15 seconds. The colors will vary depending
on the message the imager is sending.
• GREEN = 50-100% battery capacity OR 100% of
memory available.
• AMBER = 20-50% battery capacity OR 20-99% of
memory available.
• RED = 0-20% battery capacity or no memory available.
• BLUE = Bluetooth Mode
The MS-Q also emits beeps and/or vibrates to indicate
specific information to the user. Refer to the table above
to better understand MS-Q feedback.
Imager Activity
Memory LED
(LEFT indicator)
Battery LED
a
(RIGHT indicator)
a. When power is supplied via cable, the LED will remain green whenever the imager is active.
Sound
Successfully Powered-On Flashes GREEN Flashes GREEN 1 beep
Successfully Enumerated
with Host via USB Cable
None Solid GREEN 1 beep
Attempting to Decode None Battery Status None
Successful Decode and
Cabled Data Transfer
None Solid GREEN 1 beep
Successful Decode and
Data Storage
Memory Status None 1 beep
Batch Memory Full Solid RED None 3 beeps
Configuration Symbol
Successfully Processed
None None
1 beep, pause, 1
beep
Configuration Symbol
Successfully Decoded but
Not Processed
None None 6 beeps
Attempting to Connect to
Bluetooth
Flashes BLUE Solid GREEN None
Bluetooth Connection
Failed
None None 4 beeps
Bluetooth Connection
Successful
Flashes BLUE every 15
seconds
Flashes Battery Status
every 15 seconds
None
Sending Bluetooth Data Flashes Memory Status None None
Left
LED
Right
LED