User`s manual

I/O Parameters
Save
Settings
Default
to USB
Default
to PS/2
Clear
All Data
Clear
XML
Rules
MS-Q Imager User’s Manual 6-3
Laser Target
In most applications the laser target will have no
effect on symbol readability. Laser settings are
typically a matter of user preference.
Laser Target Brightness
Read one of the following symbols to set the brightness of the laser target.
Laser Target by ESP
Note: Laser On Before Capture determines whether the laser target will be on or off just
before the MS-Q captures and image, and is disabled by default.
Laser target
exit point
This will disable the laser target. The
LEDs and the ability to decode symbols
will not be affected.
Laser Target Off
Laser Target On
High (Default) Medium
Low