User`s manual

6-2 MS-Q Imager User’s Manual
I/O Parameters by ESP
I/O Parameters by ESP
To make changes to configuration settings in the I/O Parameters menu tree control:
4. Left click again on the open screen to
complete the selection.
5. Right click on the open screen and
select Save to Reader to implement
the command in the imager.
2. Double click on the parameter
and click once in the selection box
to view options.
3. Place your cursor in the selection
box, scroll down to the setting you
want to change and click once on
the setting.
1. Left click on the + to expand the tree.