User`s manual

Profile Card Configuration

MS-3000 Single Head Decoder User’s Manual

4-9

4–Profile Card.

Mode 9: Timeout

Since the number of profile card settings is limited to 255, trigger timeouts

entered from the profile card can only affect a range from 0.1 seconds to

25.5 seconds, in tenths of a second.

To set Timeout, multiply the desired number of seconds for timeout by 10

and enter the result in binary format.

See mode 1 for switch settings for timeout ranges from 0.1 seconds to 5

seconds. (Although not shown for mode 1, switches 7 and 8 are OFF for 1

through 50.) See “Binary Calculations” on page 4-13 for timeout

ranges from 5.1 seconds to 25.5 seconds.

Mode 8: Bar Code Output, When to Output, External Trigger

Polarity, Match Code, Noread Message

Data Switches

Bar Code

Output

When to

Output

External

Trigger

Polarity

Match

Code

Noread

Message

12 345

Disabled As Soon as Possible Negative Disabled Disabled

Enabled

End of Read Cycle

Positive

Enabled

Mode Switches = On

= Off

Mode Switches

= On

= Off