Spec Sheet

PIN ASSIGNMENTS
CONNECTOR A
M12 12-pin plug:
MECHANICAL
Depth: 3.79” (96.3 mm) Width: 2.27” (57.6 mm)
Height: 1.59” (40.5 mm) Weight: 10 oz. (280 g)
ENVIRONMENTAL
Enclosure: Die-cast aluminum, IP65/67 rated
Operating Temperature: 0° to 50° C (32° to 122° F)
Storage Temperature: -29° to 70° C (-20° to 158° F)
Humidity: Up to 90% (non-condensing)
COMMUNICATION INTERFACE
Interface: RS -2 32/422 /48 5 o r Et he rne t
CE MARK
General Immunity for Light Industry:
EN 55024: 1998 ITE Immunity Standard
Radiated and Conducted Emissions of ITE
Equipment: EN 55022:98 ITE Disturbances
LIGHT SOURCE
Type: High output LEDs
LIGHT COLLECTION OPTIONS
Progressive scan, square pixel.
Shutter: Software adjustable 1/60 to 1/100,000
WVGA: 752 by 480 pixels
SYMBOLOGIES
2D Symbologies: Data Matrix (ECC 0-200), QR
Code, Micro QR Code, Aztec Code
Stacked Symbologies: PDF417, Micro PDF417,
GS1 Databar (Composite & Stacked)
Linear Barcodes: Code 39, Code 128, BC 412,
I2 of 5, UPC/EAN, Codabar, Code 93, Postal Codes
READ PARAMETERS
Pitch: ±30° Skew: ±30° Tilt: 360°
Decode Rate: Up to 60 decodes per second
Focal Range: 1” (33 mm) to ∞ (liquid lens autofocus)
QX Hawk Flexible, Industrial Imager
Specifi cations and Options
Microscan Systems Inc.
Tel [phone]
Fax [phone]
Microscan Europe
Tel [phone] / Fax [phone]
Microscan Asia Pacifi c
Tel [phone] / Fax [phone]
www.microscan.com
Product Information: [e-mail]
Auto ID Support: [e-mail]
Vision Support: [e-mail]
NERLITE Support: [e-mail]
CONNECTOR B
M12 12-pin socket:
Pin Assignment
9 Host RxD
10 Host TxD
2 Power
7 Ground
1 Trigger
8 Input Common
3 Default
4 New Master
5 Output 1
11 Output 2
6 Output 3
12 Output Common
Pin Assignment
9 TxD/RTS
10 RxD/CTS
2 Power
7 Ground
1 Trigger
8 Input Common
3 Terminated
4 Input 1
5 422/485 TxD (+)
11 422/485 TxD (–)
6 422/485 RxD (+)
12 422/485 RxD (–)
ETHERNET
CONFIGURATION
CONNECTOR B
M12 8-pin socket:
Pin Assignment
1 Terminated
2 Terminated
3 Terminated
4 TX (–)
5 RX (+)
6 TX (+)
7 Terminated
8 RX (–)
MODULAR ZOOM OPTICS: Inches (mm)
DISCRETE I/O
Input 1: (Trigger/New Master): Optoisolated,
4.5–28V rated, (13 mA at 24 VDC) New Master is
(–) to signal ground
Outputs (1, 2 & 3): Optoisolated, 1–28V rated,
(I
CE
<100 mA at 24 VDC, current limited by user)
SAFETY CERTIFICATIONS
CDRH, FCC, UL/cUL, CE, CB, BSMI (compliant)
ROHS/WEEE COMPLIANT
ISO CERTIFICATION
Certi ed ISO 9001:2000 Quality Management
System
©2009 Microscan System, Inc. SP064_3 09/09
Read Range and other performance data is determined using high quality
Grade A symbols per ISO/IEC 15415 and ISO/IEC 15416 in a 25° C
environment. For application-speci c Read Range results, testing should
be performed with symbols used in the actual application. Microscan Ap-
plications Engineering is available to assist with evaluations. Results may
vary depending on symbol quality. Warranty–Three year limited warranty on
parts and labor. Extended warranty available.
15°
30°
45°
INDICATORS
LEDS: Read Performance, Power, Read Status
Green Flash: Good read Red X: Symbol locator
Beeper: Good read, match/mismatch, noread,
serial command con rmation, on/off
ELECTRICAL
Power Requirement: 5–28 VDC
LASER LIGHT
Narrow-bar-width Read Range Field of View Depth of Field
1D 2D (using autofocus) Inside Edge Outside Edge Inside Edge Outside Edge
0.0033 (0.08) 0.005 (0.13) 1 to 6 (25 to 152) 0.53 (13) 1.8 (46) 0.2 (5) 0.8 (20)
0.0075 (0.19) 0.010 (0.25) 1 to 14 (25 to 356) 0.53 (13) 3.5 (89) 0.8 (20) 2.5 (64)
0.015 (0.38) 0.020 (0.51) 2 to 29 (51 to 737) 0.53 (13) 7.5 (191) 1.5 (38) 9 (229)
0.035 (0.89) 0.050 (1.27) 3 to 60 (76 to 1524) 1.03 (26) 15.5 (394) 7 (178) 50 (1270)
Narrow-bar-width Read Range Field of View Depth of Field
1D 2D (using autofocus) Inside Edge Outside Edge Inside Edge Outside Edge
0.0075 (0.19) 0.010 (0.25) 1 to 5 (25 to 127) 1.3 (33) 4.1 (104) 1.5 (38) 2 (51)
0.015 (0.38) 0.020 (0.51) 1 to 9.5 (25 to 241) 1.3 (33) 7.5 (191) 2 (51) 6 (152)
0.035 (0.89) 0.050 (1.27) 1 to 23.5 (25 to 597) 1.3 (33) 18.3 (465) 3.8 (97) 19 (483)
Narrow-bar-width Read Range Field of View Depth of Field
1D 2D (using autofocus) Inside Edge Outside Edge Inside Edge Outside Edge
0.0033 (0.08) 0.005 (0.13) 1 to 3 (25 to 76) 0.83 (21) 1.8 (46) 0.4 (10) 0.8 (20)
0.0075 (0.19) 0.010 (0.25) 1 to 6.5 (25 to 165) 0.83 (21) 3.5 (89) 0.8 (20) 1.8 (46)
0.015 (0.38) 0.020 (0.51) 1 to 16 (25 to 406) 0.83 (21) 8.3 (211) 2 (51) 8.5 (216)
0.035 (0.89) 0.050 (1.27) 2 to 32 (51 to 813) 1.3 (33) 16.4 (417) 3 (76) 21.5 (546)
Complies with 21 CFR 1040.10
and 1040.11 except for deviations
pursuant to Laser Notice No. 50,
dated June 24, 2007.
CLASS 1
LASER PRODUCT