Spec Sheet

High Quality
Symbol
Contrast
Axial Non-uniformity
Unused
Error Correction
Fixed Pattern Damage
Modulation
Grid Non-uniformity
Print Growth
Poor Quality
Poor Quality
Underprint
Microscan's Quadrus® Verifier is an ISO/IEC 15415 and AS9132-compliant Data Matrix verifier ready for
factory floor use. The Quadrus Verifier is a precision instrument certified to ISO/IEC 15426-2 Data Matrix
conformance standards ensuring that your marks will be verified accurately every time.
QUQU
QUQU
QU
ADRUSADRUS
ADRUSADRUS
ADRUS
®®
®®
®
VERIFIERVERIFIER
VERIFIERVERIFIER
VERIFIER
Data Matrix Verifier
Unlike most verifiers that are mounted on scientific stands designed for the lab, the Quadrus Verifier is a
fully-contained, compact device that is easy to integrate into a factory setting. Quadrus Verifier’s fully
enclosed illumination chamber provides the controlled lighting environment required for accurate,
repeatable verification. No on-site calibration of optics or lighting is needed to verify marks with Quadrus
Verifier. Simply present the part to the Verifier, trigger, and receive a symbol verification report.
ESP® Easy Setup Program
Offers complete symbol verification reports. The
report shows the image, decoded data, time stamp
and allows the user to input operator name and
company name. Formats include .pdf, .html, .cvs, and
.rtf.
ISO/IEC 15426-2 Certified
ISO/IEC 15426-2 is a standard that certifies
verification hardware to ensure results are consistent
and repeatable. Quadrus Verifier is a precision verifier
that conforms to ISO/IEC 15426-2, which is required to
perform ISO/IEC 15415 verification.
ISO/IEC 15415 Compliant
Quadrus Verifier provides verification of 2D
symbols for ISO/IEC 15415 parameters:
• Fixed Pattern damage • Reference decode algorithms
• Symbol Contrast • Modulation
• Unused Error Correction• Axial non-uniformity
• Grid non-uniformity • Print growth (ungraded)
AS9132
Verifies directly-marked Data Matrix symbols in
accordance with the parameters called out in the
AS9132 standard:
• Quiet Zone • Dot ovality
• Cell fill • Contrast
• Dot center offset • Angle of distortion
• Symbol type
MIL-STD-130 - UID Ready
Requires verification of Data Matrix symbols to both
ISO/IEC 15415 and AS9132 standards as required
by the MIL-STD-130 specification.
FACTORY FLOOR READY DATA MATRIX VERIFIER
Overprint
Illumination Chamber
The illumination chamber is specifically engineered
to block out ambient light to provide a controlled
environment needed for consistent and repeatable
results.
Fully Calibrated System
Quadrus Verifier provides the user with a
ready-to-use, ISO/IEC 15426-2 certified
system. To use, simply center a symbol
in the field of view and trigger the
Quadrus Verifier. There is no need to
focus the optics or set the light angles,
as these are calibrated and set at the
factory. These fixed optics and pre-set
illumination angles ensure the Quadrus
Verifier provides consistent, reliable, and
accurate results every time.
Factory Floor Ready
Quadrus Verifier is the first 2D verifier designed
specifically for use in a factory environment.
Its compact, lightweight design makes the
Quadrus Verifier easy to integrate into
manufacturing processes. This self-contained,
factory-calibrated system offers flexible mounting
allowing the Quadrus Verifier to be adapted to any
application quickly and easily.
ISO/IEC 15415
Verification Test Parameters
QuadrusVerifier_RevD.PMD 4/12/2006, 10:59 AM1