User`s manual

4-18
Basic Guest Check Operations
Seat #
Seat #
This key changes the active seat on an open guest check. You
generally use it when assigning items to different seats.
Assign Items to Seats
1. Begin a guest check.
2. Do one of the following:
❏ If the system prompts Seat 1: Ready for your next entry,
skip to step 3.
❏ If the system prompts Ready for your next entry, type the
first seat number and press [Seat #].
3. Enter menu item(s) for this seat.
4. Press [Seat #] to increment the seat number by one, or enter
the next seat number and press [Seat #].
Note: Your system may be programmed to increment the seat
number automatically when certain menu items are ordered.
5. Enter the items for the next seat.
Continue incrementing the seat number until all items have
been ordered.
Change Active Seat
1. Begin or pick up a guest check.
2. Do one of the following:
❏ Press [Seat #]. The active seat increments by one.
❏ Type a number and press [Seat #]. The active seat
changes to the one you entered.
Note
If seat numbers are optional on your system, and you
enter 0 for the seat number, the active seat will be 0.
If seat numbers are required on your system, the
system will not allow seat #0.
Seat #