User`s manual

3700 User’s A-47
Prompts and Messages
List of Prompts and Messages
Scale calibration error
This message displays if the scale is not calibrated to zero.
Press [Clear] and recalibrate the scale. Refer to the
documentation provided with your scale, if necessary.
Scale error
This message may display if the UWS is not configurated
properly or if there is a malfunction with the scale itself. Press
[Clear] to cancel and contact your service representative.
Scale in motion
This message displays if you are using an attached electronic
scale, and the weight reading is not steady when you press the
[Menu Item] key. This could be caused by someone is touching
the scale. Press [Clear] and ensure the scale reading is steady
before pressing the weighted [Menu Item] key.
Scale in use
This message displays if the scale does not read 0 when
entering the weight of an item manually. Press [Clear] to
continue.
Scale overcapacity
This message displays if the weight placed on the scale is
greater than the scale capacity. If the weight to be sold is over
the capacity, you can divide the item in two and post each half
as separate menu items.
Scale undercapacity
This message displays if the weight registered on an attached
electronic scale is less than zero. The pan for holding the item to
be weighted may be missing or something may be stuck under
it.
Seat feature must be enabled
This message displays if you try to post a fixed price meal and
the seat feature is not enabled. Press [Clear] to continue.
<Seat> has been closed
This message displays if you try to include in a filter a seat
number that was previously filtered and tendered in full. Press
[Clear] to continue.