User`s manual

A-40
Prompts and Messages
List of Prompts and Messages
Nothing on scale
This message displays if the weight registered on an attached
electronic scale is zero. Press [Clear] to cancel.
Nothing to repeat
This message displays if you press the [Repeat Round] key and
no items from the previous service rounds are programmed to
repeat. Menu items must be programmed to repeat.
No valid check numbers available
This message displays if you attempt to open a guest check, and
all of the available check numbers for this revenue center or
UWS are already open. Close some open guest checks to free up
some check numbers. The range of available check numbers for
this revenue center or UWS may need to be enlarged.
One moment please, sending message
This prompt displays when the UWS initiates communication
with a PMS computer to execute the function you just entered,
such as a computer inquire or a room charge posting.
Only <#> <beverages> for <#> guests?
This message displays when beverage control is used, and in the
current service round you posted less beverages than there are
guests entered for the check. Press [Enter] to confirm and end
the service round, or [Clear] to remain in the service round so
that you can enter more beverages.
Only <#> menu item(s) remaining
This message displays if you order more of a limited availability
menu item than are available to be sold. The number of
remaining menu items displays in the message. Press [Clear] to
continue. If you want, you can order the last remaining menu
items before someone else gets them.
The number available for this menu item may be changed by an
authorized employee using UWS Procedures.
Open check file full Programming Error
This message displays if you try to service total a check when
the memory allocated for open check data is full. If this message
displays, take an Open Check Report and close all the checks
that can or should be closed.