User`s manual

3700 User’s A-31
Prompts and Messages
List of Prompts and Messages
❏ You try to service total a fast transaction and your system is
not programmed to allow this. Tender and close the guest
check on the system, then begin another transaction.
❏ You try to perform a partial tender with a credit card on a
fast transaction when using line-by-line printing. Press
[Clear] to cancel.
❏ You press an [Add/Transfer Check] key.
❏ You are in a fast transaction that is printing a line-by-line
customer receipt and you press the [Split Check] key.
❏ You are in a fast transaction that is printing a line-by-line
customer receipt and you press the [Service Total] key.
Invalid with line by line receipt
This message displays when you try to complete any operation
that is prohibited while you’re using line-by-line printing. Press
[Clear] to continue.
Is this payment a debit?
This message displays if the tender key you just pressed is
programmed to prompt for immediate or deferred debiting.
Press [Enter] for immediate debit, or [Clear] for deferred debit.
This feature is not used in the US.
Items not sent to kitchen
This message displays while you’re using the Hold and Fire
feature for either of these reasons:
❏ You try to split, memo tender, or transfer this check before
firing. Press [Clear] to continue. Fire the order and begin
again.
❏ You try to add checks, and one or both checks still have
items on hold. All items must be sent (fired) to the
appropriate order devices before adding checks.
Job privilege level
This message follows the prompt “Authorization is required
for:” It displays when you try to clock in to a job and are not
privileged to do so. Enter an authorized employee’s ID to
continue, or press [Clear] to cancel.
Keyboard already selected
This message displays if you try to change to the keyboard that
is already in use. Press [Clear] to continue.