User`s manual

3700 User’s 1-5
Introduction to the 3700 System
3700 Hardware
Currently, the PCWS family consists of the Model 64, the Model
32 and the Model 32L, which share common features and a
common PC AT

compatible architecture.
Model 64
The PCWS Model 64 is the latest addition to the MICROS PC
Workstation family, and is supplied with an Intel
®
Pentium
®
166 MHz or 100 MHz processor. It retains all of the POS
hardware extensions of the Model 32 and 32L PCWSs, but is
powerful enough to support small server applications and active
Super Video Graphics Array (SVGA) LCD panels.
Model 32
The Model 32 supports a 66 MHz Intel 486 processor, 64 MB of
parity checked DRAM memory and an optional 256 Kbyte of on-
board cache memory.
Model 32L
The Model 32L has the same basic AT compatible architecture
as the Model 32.The Model 32L supports an AMD
®
5
x
86
®
133
MHz processor and up to 32M of parity-checked DRAM memory.
A 10BaseT network interface is built into the system board.
Common Features
All three models are PC AT compatible, and can support
optional internal hard drives and/or can connect to an optional
external 1.44 MB 3.5” floppy drive module and an ultra low
profile PS/2
®
keyboard. The common set of hardware
extensions, which allow the PCWSs to function as Point-Of-Sale
(POS) terminals include:
❏ A standard, 11.3” 640x480 VGA color LCD panel. An
optional sharper, higher resolution, higher contrast, 12.1”,
800x600 SVGA color display is available for a Model 64
enclosed in an ADs case.
❏ Fluorescent backlighting for the LCD, which enhances the
readability of the display, even in dimly lit environments.
❏ An Elo TouchSystems “five wire” resistive touchscreen panel
mounted in front of the Liquid Crystal Display (LCD), which
allows users to control your application, in place of, or in
conjunction with, an MS-compatible mouse.
❏ Configurable RS422 ports that connect the PCWS to a
MICROS supplied Local Cluster Controller (LCC) or Remote
Cluster Controller (RCC), to a MICROS supplied roll or slip
printer, or to any other RS422 device via an RJ45 connector.