User`s manual

4-30

Basic Guest Check Operations

Chain/Fire

This feature lets you post items to a series of checks without

sending the check detail to remote order printers until you

press a separate [Service Total] key.

Steps

1. Begin the first of several checks that you want to chain.

You may chain checks at the same table or different tables. If

you are programmed to begin checks by table number and all

the checks are at the same table, the group numbers will be

different.

2. Post menu items.

3. Press [Chain].

4. Repeat Steps 1-3 for all checks in the party except the last one.

5. Begin the last check.

6. Post menu items.

7. Press the regular [Service Total] key.

All of the orders are sent to designated remote printers at the

same time and on the same order receipt.

Message What it Means Action Required

AUTHORIZATION, ENTER

ID NUMBER

You are not privileged to use this

key.

An authorized person’s ID

must be entered.

ORDER CHAINING

ACTIVE

A tender or function key was

pressed while chaining checks

together.

Press [Clear] to continue.

Chaining is completed when

a [Service Total] key is

pressed.

Chain