Installation, Operation and Warranty Information Owner manual

5
DOC No: 7046 REV G
Limits of Use 6
Installation in Explosive and Fire Danger Zones 7
Description 8
Motor Adaptors 9
Unpacking and Storage 9
Assembly 10
Space Requirements 10
Location 10
Filtration 11
Fittings 12
Piping 13
Mounting 13
Electrical Connection 14
Air Connection 14
Operation 15
Bypass Option 16
Magnet Decoupling 17
Maintenance 18
Fault Isolation 19
Technical Specification 20-34
Table of Contents
Safety
The following are used throughout this guide to indicate procedure that, if not followed
correctly, may result in injury to personnel or damage to equipment.
Warnings are used to alert the reader to a procedure or practice, which if
not followed correctly, could result in personal injury.
CAUTION
NOTE
Warning - Hot Surface is used to alert the reader to a procedure or
practice, which if not followed correctly, could result in personal injury
due to contact with a hot surface.
Cautions are used to alert the reader to a procedure or practice, which
if not followed correctly, could result in damage to the pump, motor, or
ancillary equipment.
Notes are used to highlight important information that may assist the reader in
carrying out a procedure or in understanding the text.