User's Manual

MicroPower Technologies
1-877-536-0128 | micropower.com
4
Package Contents
Solveil Solar Powered Camera
Installer Provided Parts and Infrastructure
Solveil Hub
SLV-C30S-1040-IR, SLV-C30S-1040, SLV-C306-1011-IR, SLV-C30S-1011
• Solar Wireless Video Camera/ IP66 Enclosure
(Includes (2) Phillips screws for aaching the bracket to the camera housing)
• Camera Mounng Arm
(Including aachment and bracket screw ulized to adjust the camera posion and angle)
• One Direconal Antenna (2.4GHz)
(Includes bracket with washers and screws and antenna cable)
• One External Solar Panel (Includes bracket and mounng screws) Solar panel size will vary depending on the
geographic region the camera is installed.
• Antenna Bracket Assembly
• Installer should supply addional screws or stainless steel worm drive bands “hose clamps” in appropriate
size(s) for mounng the various camera system components to a pole.
The installer will need to provide the parts required to physically mount the solar panel, camera, and antenna
assembly to the desired mounng surface. This may include screws, stainless steel hose clamps / straps, masts,
wire es, etc. As needed for a given installaon situaon.
The installer will also need to have a means to access the desired mounng locaon, as well as the tools as needed
to complete the installaon job. Such as a 10mm & 8mm socket, baery powered drill, screw driver, zip es, 2 sets
of pliers, ladder / powered li, etc.
The hub will require reliable 110V AC power, a climate controlled (or semi-climate controlled) dry environment to
mount or place the receiver, and a means for the antenna cable to access the outside of the structure such that
clear line of sight can be established between the hub antenna(s) and the camera antenna(s). The hub will also
require an IP network connecon (Ethernet) in order for the video streams to be accessible. The hub may also be
powered by a 12VDC source, or via a PoE (803.3at) splier capable of supplying at least 15W of power.
(SLV-H20HA)
• Solveil Hub, Including power supply, mounng hardware, antenna cable, connecon adapters and 15’ long
antenna cable (longer cables may be purchased from MicroPower)
• One Direconal Antenna (2.4GHz), Including bracket with washers, etc.
Default Hub IP Address: 192.168.0.100
Default Hub Login: kevin
Default Hub Pass: kevin