User's Manual

Product Training
Experienced MicroPower installers can install cameras and equipment quickly and eciently, however due to
the highly ecient nature of the camera system, the MicroPower equipment setup diers from convenonal IP
surveillance devices. To quickly help System Integrator / Installers familiarize themselves with the MicroPower
product line best pracces and troubleshoong, MicroPower oers a variety of training opons. The quickest and
easiest are the short series of training videos that may be viewed on-line through the website “Partner Portal”. For
more informaon on the training resources available, please call the customer support line or visit our website.
How To Use This Guide
This guide is setup in the same sequenal order as a camera installaon would occur. This will cover in detail all
aspects of the installaon and conguraon of a MicroPower camera system. We highly recommend watching
our series of on-line training videos. These videos will provide a strong foundaon and understanding of how the
system works, and ulmately making this informaon easier to understand.
Contacng MicroPower Customer Support
MicroPower’s customer support strategy is through a network of best-in-class business partners including OEMs,
systems integrators and systems resellers. If your MicroPower product was purchased directly from a MicroPower
business partner, that partner is the rst point of contact for technical support. If the business partner cannot
resolve a problem, then the partner will contact MicroPower.
Web Support: hp://www.micropower.com
Email Support: [e-mail]
Toll Free Phone Support
Worldwide:
[phone]
[phone]
Press opon 2 for Customer Support
Fax Support – Worldwide: [phone]
General Safety Precauons
• Follow all cauons, instrucons, and warnings as listed on the product and related documentaon, including
electro-stac discharge (ESD) recommendaons, physical handling advice and other best pracces.
• Ensure that the voltage and frequency of your power source match the voltage and frequency required by the
equipment. Do not use alternave power supplies without rst contacng MicroPower.
• Do not aempt to modify or change the internal baeries. The baery size and voltage are calculated to
match the size, voltage, and runme required by the equipment. Modifying the baery system could result in
damage to the equipment and nullicaon of the product warranty.
• Use only the included antennas and ancillary equipment provided with the product.
• Do not make mechanical or electrical modicaons to equipment. MicroPower is not responsible for the safety
or regulatory compliance of a modied product.
• Protect your warranty. A product that has been damaged through misuse, abuse or misapplicaon may be
determined to be out of warranty.