User's Manual

Table Of Contents

Helios Installation Guide

5) Once all the IP address(es) have been entered, select Apply.

6) Reboot the hub by moving to the Hub Status Tab, and selecting the Reboot Hub

button.

G. Live View

The tab, “Camera Info”, is used as a diagnostic tab for MicroPower technical support

and for observing live video to test the connection. In particular, Live View can help

determine whether a valid video stream is present, and be used to set the focus and

zoom of the camera, even if a VMS is not yet configured. Below is the opening menu

for Camera Info.

Selecting the camera of interest will diplay two additional tabs; Camera MAC Address

and Live View. The tab, Live View, will initiate a video connection between the video

hub and the Camera. Select “Connect”. Yyou may need to approve a small Java app to

run, depending on your web browser configuration.

Reboot Hub