User`s guide

9
Warning: Be careful not to pinch your fingers when adjusting the
monitor’s angle.
OPERATING INSTRUCTIONS
The following sections provide information about operating and adjusting
your monitor.
General Instructions
To turn on the monitor, do the following:
1 Check that the power supply is connected to the monitor and a power
outlet or socket.
2 Check that the video cable is connected to your computer’s video port.
3 Locate the power button (see Figure 4 and Table 1 on page 10).
4 Press the power button. The power indicator will light up. The monitor
features a unique quick-switch system, so a picture should appear within
seconds after the monitor is turned on.
Cleaning the Monitor
To keep the monitor looking new, periodically clean the monitor’s case with a
soft cloth. As a safety precaution, always unplug the monitor before cleaning
it. Stubborn stains on the monitor’s case can be removed using a damp,
dust-free cloth and a mild detergent solution.
Caution: Never use strong solvents, such as thinner, benzene, or
abrasive cleaners, because these will damage the monitor.
To clean the LCD screen, use a damp cloth; however, make sure the
monitor has been turned off first. Never apply water directly to the LCD
screen. Always apply the water to the cloth first, and then wipe down the
screen. You can also purchase and use monitor wipes to clean the LCD
screen.