User`s guide

Appendix A
21
Chips & Tech
(90)Set
-
up RAM.
Phoenix
(90)Initialize hard
-
disk controller.(Beep)=3
-
2
-
1
-
1
Error Code
–
91
AMI
(91)Floppy setup complete. Hard
disk setup to be done next.
Compaq
(91)CMOS seems to be OK.
Chips & Tech
(91)CPU speed.
Phoenix
(91)Initialize local
-
bus hard
-
disk controller.(Beep)=3
-
2
-
1
-
2
Error Code
–
92
AMI
(92)Hard disk setup complete. About to go for BIOS ROM data area check.
Compaq
(92)Error on CMOS read/write test.
Chips & Tech
(92)Configuration check.
Phoenix
(92)Jump to User Patch 2.(Beep)= 3
-
2
-
1
-
3
Error Code
–
93
AMI
(93)BIOS ROM data area check halfway. BIOS ROM data area check to be
completed.
Compaq
(93)Start of D
MA controller test.
Phoenix
(93)Build MPTABLE for multi processor boards.
Error Code
–
94
ACER
(94)#5 shutdown.
AMI
(94)Hard disk setup complete. Going to set base and extended memory size. BIOS
ROM data area check over.
Compaq
(94)Page registers see
m OK.
Chips & Tech
(94)POD Bootstrap.
Phoenix
(94)Disable A20 address line.(Beep)=3
-
2
-
2
-
1
Error Code
–
95
AMI
(95)Memory size adjusted due to mouse support, hard disk type
-
47.Going to verify
from display memory.
Compaq
(95)DMA controller OK.
Chips &
Tech
(95)Reset ICS.
Phoenix
(95)Install CD ROM for boot.
Error Code
–
96
AMI
(96)Memory size adjusted due to mouse support, hard disk type
-
47.Going to do any
Init before C800 optical ROM control. Returned after verifying from display
memory.
Compaq
(
96)8237 DMA Initialization complete.
Chips & Tech
(96)BIOS PEAK.
Phoenix
(96)Clear huge ES segment register.(Beep)=3
-
2
-
2
-
3.
Error Code
–
97
AMI
(97)Any Init before C800 optional ROM control is over. Optional ROM check &
control will be done next.
Chi
ps & Tech
(97)VGA power.
Phoenix
(97)Fix
-
up Multi Processor table.
Error Code
–
98
ACER
(98)#A shutdown.
AMI
(98)Optional ROM control is done. About to give control to do any required
processing after optional ROM returns control.
Chips & Tech
(98)Ad
apters POS.
Phoenix
(98)Search for option ROMs. One long, two short beeps on checksum
failure.(Beep)=3
-
2
-
3
-
1.
Error Code
–
99
AMI
(99)Any initialization required after optional ROM test over. Going to setup timer
data area and printer base address.
Ph
oenix
(99)Check for SMART Drive(optional).
Error Code
–
9A
AMI
(9A)Return after setting timer and printer base address. Going to set the RS
-
232
base address.
Phoenix
(9A)Shadow option ROMS.(Beep)=3
-
2
-
3
-
3.
Error Code
–
9B
AMI
(9B)Returned after RS
-
23
2 base address. Going to de any initialization before
Co
-
Processor test.
Error Code
–
9C
ACER
(9C)#B shutdown.
AMI
(9C)Required initialization before co
-
Processor is over. Going to initialize the
CoProcessor next.
Phoenix
(9C)Set up Power Management.(
Beep)=3
-
2
-
4
-
1.
Error Code
–
9D
AMI
(9D)CoProcessor initialized. Going to do any initialization after CoProcessor test.
Error Code
–
9E
AMI
(9E)Initialization after CoProcessor test is complete. Going to check expander