User manual

c
no
Figure 4: press the check switch once more
DbDC
Figure 5: press the check switch thirdly.
Press the check switch fourthly, it goes back to failure codes as Figure 2.
6. For six Digit PC Diagnostic Cards such as KPI6, KLPI6, KL6 and KLP6, the
codes show as below:
Figure A: Six Digit POST Code Display
For example: If the LED indicator shows D0, D1, D2, D3, D4, D5, D6, D7, D8,
D9, DA, Db, DC and shops when testing a computer, the six-bit-code card will
show as Figure B, press down the check switch once, it will go on to show as
Figure C, but Figure B back after the switch rebounds.
the last code
the code before
the last code
failure code
DA
D9 D7D8
DbDC
Figure B: when the card stops running
Figure C: press down the check switch without rebound.
For another example: If the LED shows 15 codes such as C0, C1, C2, C3, C4,
C5, C6, 31, 32, 33, 34, 35, 85, 86 and FF when testing the computer. You can see
six codes shown as C5, C4, C3, C2, C1 and C0 if you press down the check switch
when it begins to show C5. When restart the computer, you can see 35, 34, 33, 32,
31 and C6 if you press down the check switch when it begins to show 35. Restart
the computer and wait until it shows “FF”, you can see FF, 86, 85, 35, 34, 33 clear.
So you will know all the POST codes no matter how many codes there are.
7. All Kingnostics Cards (including six digit, four digit and two digit) can test
the redundant code and missing code phenomena of the traditional PC Diagnostic
Cards. Plug a Kingnostics Card a traditional PC Diagnostic Card in the same
mainboard, power on and compare their codes, and you will know the incorrect
code of the traditional PC Diagnostic Card.
The code display of the two-digit Kingnostics Card is similar with that of the
8