User manual

II. Detailed Specification of Diagnostics & Stability-

Test Card

1. Components of Diagnostics & Stability-Test Card

（1） Figure of Diagnostics & Stability-Test Card Components (MKCP6 for

example)



Connect to the RESET on the

ase, there is no need to connect

Reset Line to the case if you

don’t need to use Reset.

Connected

to RESET contact

pin on main board



the

Reset Line

There may be some differences between the real product and the figure,

please take the real product as final. Our company will keep upgrading the

product without further notice.

（2）Figure of Connection to Main Board

Please pay attention to the connection of the RESET line.

Stable indicator light

Unstable indicator light

LED indicator

chip

PCI data interface

Connected this plu

the white socket as

indieated.

