User manual

failure.(Beep)=3 -2-3 -1.
(99) Check for SMART Drive(optional).
(9A) Shadow option ROMS.(Beep)=3 -2-3-3.
(9C) Set up Power Management.(Beep)=3 -2-4-1.
(9E) Enable hardware interrupts.(Beep)=3 -2-4-3.
(9F) Determine number at ATA and SCSI drives.
(A0) Set time of day .(Beep)=3 -3-1-1
(A2) Check key lock.(Beep)=3 -3-1-3
(A4) Initialize Type matri crate.
(A8) Erase F2 prompt.(Beep)3 -3-3-1
(AA) Scan for F2 key stroke.(Beep)=3 -3-3-3
(AC) Enter SETUP.(Beep)=3-3-4-1
(AE) Clear in-POST flag.(Beep)=3 -3-4-3.Clear Boot fag.
(B0) Check for errors.(Beep)=3 -4-1-1.Unknown interrupt occurred.
(B2) POST done-prepare to boot operating system.(Beep)=3- 4-1-3
(B4) One short beep before boot.(Beep)=3 -4-3-1
(B5) terminate Quiet -Boot(optional)
(B6) Check password(optional) .(Beep)=3 -4-2-3
(B8) Clear global descriptor table.(Beep)=3 -4-3-4
(B9) Prepare boot.
(BA) Initialize DMI parameters.
(BB) Initialize PnP option ROMs.
(BC) Clear parity checkers.(Beep)=3 -4-4-1
(BD) Display Multi -Boot menu.
(BE) Clear screen(optional).(Beep)=3 -4-4-3
(BF) Check virus and backup reminders.(Beep)=3 -4-4-4
(C0) Try to boot with INT 19.(Beep)=4 -1-1-1
(C1) Initialize POST Error Manager(PEM).
(C2) Initialize error logging.
(C3) Initialize error display function.
(C4) initialize system error handler.
(C5) PnPnd dual CMOS(optional)
(C6) Initialize notebook docking (optional).
(C7) Initialize notebook docking late.
(C8) Force check(optional)
(C9) Extended checksum(optional)
(D0) Interrupt handler error.(Beep)=4-2-1-1
(D2) Unknown interrupt error.(Beep)=4 -2-1-3
(D4) Pending interrupt error.(Beep)=4 -2-2-1
(D6)Initialize option ROM error.(Beep)4 -2-2-3.Shutdown
error.(Beep)=4-2-3-1.(DA)Extended Block Move.(Beep)=4
-2-3-3.(DC)Shutdown 10 error(Beep)=4 -2-4-1
(E0) Initialize the chipset.
(E1) Initialize the bridge.
(E2) Initialize the motherboard chipset, and CPU.(Beep)=4 -3 -1-3
(E3) Initialize refresh counter and system timer(Beep)=4 -3- 1 ¨C4
27