Technical information

Twister LX System Board Manual
Chapter 2: Configuring the Twister LX
13
Jumper Settings
This section provides the jumper settings for the Twister LX system
board.
Table 2-1 lists the jumper settings to select the system speed settings.
Table 2-2 lists the settings to clear the CMOS. With your computer's
power off, close pins 2-3, wait ten seconds and place the jumper back
on pins 1-2. (The jumper must be placed back on pins 1-2 for the system
to function properly.)
NOTE: This will reset all BIOS default settings. Any changes you have made
will be lost.
Table 2-1: System Speed Selection
Table 2-2: Clear CMOS Settings
repmuJnoitcnuFsgnitteS
5W)tluafed(lamroN
SOMCraelC
2-1
3-2
*Default Setting
repmuJ
)srossecorPletnI(deepSmetsyS
W
3
3W
W
3
3W
2-14-36-58-7
332
6,lanretxEzHM 6 lanretnIzHM *
esolCesolC
nepO
nepO
662 lanretnIzHM66,lanretxEzHM
esolC
nepO
esolC
esolC
03
6,lanretxEzHM0 6 lanretnIzHM
esolC
nepOesolCnepO
333
lanretnIzHM66,lanretxEzHM
esolC
nepO
nepO
esolC