Specifications

5-3
Installing the Sound Drivers
Installing the Sound Controller Drivers
If you are installing a CD-ROM drive, it is recommended you install it before
setting up the sound controller. See Installing a CD-ROM Drive on the
previous page.
1. Follow the instructions in Chapter 3 on installing the sound riser card
and connecting devices.
2. If you previously installed another sound card, remove it and all associ-
ated files from your AUTOEXEC.BAT and CONFIG.SYS files.
3. Start your computer system.
4. Insert the sound controller driver disk into your floppy drive.
5. From the DOS prompt (C:\), type:
a:install
6. Follow the on-screen instructions and the install program automatically
copies the drivers to your hard drive.
7. Once the software is copied, the install program automatically updates
your CONFIG.SYS and AUTOEXEC.BAT files.
8. After the installation is complete, reboot your system and your sound
controller is ready to use.