Specifications

4-4
Micronics M54Hi-Plus System Board Manual
up and down arrows<↑/↓> to highlight the System Date and follow the same
procedure used to set the time.
Diskette A or B
To configure a floppy drive added to or removed from your computer, use the
up and down arrow keys <↑/↓> to select the desired drive. Use the <+/->
keys to change the setting until it matches the floppy drive you installed. The
BIOS supports 2.88MB, 1.44MB, 1.2MB, 720KB, and 360KB floppy drives.
IDE Adapters (Hard Disk Setup)
If you are setting up a SCSI hard disk, select None in the IDE Device param-
eters (see your SCSI card manual for more details).
To install an IDE device, select the device to configure and press <Enter>.
An IDE Device submenu will appear. (Figure 4-3).
Figure 4-3 IDE Device Submenu
Autotype Fixed Disk
The easiest way to set your IDE devices is to let the BIOS do it for you.
When the IDE Device submenu first appears, the Autotype Fixed Disk
selection is highlighted. Simply press <Enter>, and the remaining informa-
tion is entered automatically.