Specifications

iii
Micronics Quick Installation
We know that many experienced people prefer to read as little of the docu-
mentation as possible. If this sounds like you, here’s the short form:
1. Make backup copies of your installation and configuration diskettes.
2. Ground yourself to prevent damaging static discharge, then remove the
M54Hi-Plus from its packaging.
3. Configure and verify the system board’s jumper settings. (See Jumper
Settings in Chapter 2)
4. Install the CPU and the system memory (Chapter 3).
5. Install the system board into the chassis and make all necessary
connections (Chapter 3).
6. Install the sound riser card and connect all sound devices (Chapter 3).
7. Install any peripherals (Chapter 3).
8. Turn the computer on and press the <F2> key when you see the screen
below: