Specifications

2-4
Micronics M54Hi-Plus System Board Manual
Table 2-5 lists the jumper settings to select the BIOS boot block.
Jumper Function Setting
W6 Normal (default)
Reversed
2-3
1-2
Table 2-5 Boot Block Selection
Table 2-6 lists the jumper settings to reset the BIOS. With the computer’s
power off, short Jumper W9 for about five seconds and place the jumper back
in the open position. The jumper must be placed back into the open position
for the system to function properly.
Jumper Function Setting
W9 Normal operation (default)
Clear CMOS RAM settings
open
closed
Table 2-6 BIOS Reset Jumper
Note:
This will reset all BIOS settings to their defaults. Any changes you have
made will be lost.