Specifications

2-1
Jumper Settings
2
Configuring the M54Hi-Plus
Although the M54Hi-Plus system board is packaged in protective
materials, it is important to use care while unpacking and setting up.
Static Electricity
The M54Hi-Plus is shipped from the factory in an antistatic bag. To
reduce the possibility of damage, it is important to neutralize any
accumulated static charges on your body before handling the board.
The best way to neutralize these static charges is to ground yourself
using a special wrist or ankle strap. If you do not have a strap, you
should touch both of your hands to a safely grounded object. After you
have grounded yourself, ground the M54Hi-Plus via the solder pads
surrounding one of its mounting holes.
Once the M54Hi-Plus is removed from its packaging, place it on top of
the antistatic bag. Carefully inspect the board for damage which may
have occurred during shipment.
Office Environment
Make sure the finished computer system is in an area with good
ventilation. The system should not be in direct sunlight, near heaters,
or exposed to moisture, dust, or dirt.