User`s manual

- 3 -
 One RJ-45 Broadband Internet connection
 One PC with an installed 10Mbps, 100Mbps, or 10/100 Mbps Ethernet card
 TCP/IP network protocol for each PC
 UTP network cable with RJ-45 connector
1.5 Applications
 Device sharing and wireless multimedia file transfer
 Wide range wireless office
 Wireless building-to-building data communication
 Built-in infrastructure mode
 Difficult-to-wire environments
 Temporary LANs for scenarios such as trade-exhibitions and meetings
 Frequently changing environments
 Remote access to corporate network information
2 Getting Started
2.1 The Front LEDs
LEDs:
LED Description
Power
Power is properly connected.
WLAN
Lights on when the wireless works.
LAN(1-4)
If the LED continuously illuminated, the Router is successfully
connected to a device through the corresponding port (1, 2, 3 or 4).
If the LED is flashing, the Router is actively sending or receiving data
over that port.
PPPoE
In dynamic or fixed IP mode, it indicates WAN Ethernet connection
speed.
In PPPoE mode, it indicates PPPoE connection status.
WAN
The WAN illuminates when the Router is powered on and flashes
when the Router is actively sending or receiving data over the WAN
network.