User`s manual

- 11 -
3.3.3 PPPoE:
PPP over Ethernet is a common connection method used for xDSL. You must
enter the “User Name” and “Password” provided by your Internet Service
Provider (ISP). You could set the MTU from 1400 to 1492. The default is 1400.
3.3.4 PPTP:
Point-to-Point Tunnel Protocol is a connection method used for specific area.
You must enter the “PPTP Account”, “PPTP Password” and “Service IP
Address “ provided by your ISP. Enter SP916GL IP address and Subnet Mask
into the “My IP Address” and “My Subnet Mask” fields. Click “Apply” to
continue.