User`s manual

4
Follow steps below to mount SP915-1000 with a wall-mount kit #2.
1. Stick the supplied sticker for wall mount #2.
2. Use the 7.00mm driller to drill a 25mm-deep hole at each of the
cross marks.
3. Plug in a supplied plastic conical anchor in each hole.
4. Screw a supplied ST3.9*20 screw in each plastic conical anchor for
a proper depth so that the wireless AP can be hung on the screws.
5. Fix two wall mounts #1 to the bottom of SP915-1000 by using two
M4*80 screws.
6. After fix wall mount #1 and #2, please see the diagram to align wall
mount #1 and #2.
7. Fix the wall mount #1 and #2 together using M4*80 screw to
complete installation.