User`s manual

¾ AP Client is for Dynamic LAN-to-LAN Bridging. The AP Client

automatically establishes bridge links with APs from any vendors.

y Enabling/disabling SSID broadcasts.

y MAC-address-based access control.

y Antenna alignment assistance.

y Link health monitoring.

y Wireless client isolation.

y AP load balancing.

y Transmit power control.

y Association control can be configured to deny association requests

when it has served too many wireless clients or traffic load is too

heavy (AP/Bridge)

y DHCP Server/Client including static DHCP mappings.

y Provides Layer 2, Layer 3, and Layer 4 filtering capabilities.

y System Log: local log and remote log by SNMP.

y Supplying power to an AP over an Ethernet cable using PoE.

y Restarts hardware when firmware failure is detected.

1.3 LED Indicator

There are several LED indicators inside the housing of the SP915-1000. They

are defined as follows:

y ALV: Alive. Blinks when the AP is working normally.

y RF: SP915-1000 interfaces activity

y LAN: Ethernet LAN interface activity

y PWR: Power