User`s manual

Method of obtaining an IP Address Set manually

IP Address 192.168.0.1

Subnet Mask 255.255.255.0

Default Gateway 0.0.0.0

DHCP Server Disabled

Management

UPnP Enabled

System Log Local Log

SNMP Enabled

SNMP read community public

SNMP write community private

Telnet Enabled

4.2 Appendix B: Troubleshooting

Check the following:

y Make sure that the power of the AP is on and the Ethernet cables are

connected firmly to the Ethernet jacks of the AP.

y Make sure that the LED ALV of the AP is blinking to indicate the AP is

working.

y Make sure the types of the Ethernet cables are correct. Recall that

there are two types—normal and crossover.

4.2.1 Wireless Settings Problems

Problem: The wireless client computer cannot associate with an AP.

y Is the wireless client set in infrastructure mode?

¾ Check the operating mode of the WLAN NIC.

y Is the SSID of the WLAN NIC identical to that of the prospective AP?

¾ Check the SSID setting of the WLAN NIC and of the AP.

y Is the WEP functionality of the prospective AP enabled?

¾ Make appropriate WEP settings of the client computer to match

those of the AP.

y Is the prospective AP within range of wireless communication?