User`s manual

38
The system events are divided into the following categories:
y General: system and network connectivity status changes.
y Built-in AP: wireless client association and WEP authentication
status changes.
y MIB II traps: Cold Start, Warm Start, Link Up, Link Down and SNMP
Authentication Failure.
y RADIUS user authentication: RADIUS user authentication status
changes.
3.7.2.3 SNMP
The SNMP (Simple Network Management Protocol) functionality can be
disabled, and users specify the name (used as a password) of the read-only
and read-write community. In addition, up to 5 SNMP trap targets can be set
in the SNMP Trap Table.
To specify a trap target:
1. Type the IP address of the target host.
2. Type the Community for the host.
3. Select the corresponding check box next to the IP address text box.