User`s manual

32
With MAC-Address-Based Access Control, users can specify the wireless
client computers that are permitted or not permitted to associate with the AP.
When the table type is set to inclusive, entries in the table are permitted to
associate with the AP. When the table type is set to exclusive, entries in the
table are not permitted to associate with the AP.
For denying access to the wireless network, please follow the below
procedure:
1. Select ‘Enabled’ from the Functionality drop-down list.
2. Set the Access control type to ‘exclusive’.
3. Specify the MAC address of a wireless client to be denied access,
and then click <Add>.
4. Repeat Steps 3 for other wireless clients.
For granting access to wireless network, please follow the below procedure:
1. Select ‘Enabled’ from the Functionality drop-down list.
2. Set the Access control type to ‘inclusive’.
3. Specify the MAC address of a wireless client to be denied access,
and then click <Add>.
4. Repeat Steps 3 for other wireless clients.
To delete an entry in the access control table (size: 64):
1. Click <Delete> next to the entry.
2. Instead of manually entering MAC addresses to the access control
table one by one, users can prepare a text file that contains all the
MAC addresses and put it on a TFTP server. Then command the AP