User`s manual

y Trigger the restoring process by clicking <Restore>. The AP will then

download the configuration backup file from the TFTP server.

Resetting Configuration to Factory Defaults

Clicking the <Reset> button resets the device configuration to factory defaults.

3.5 TCP/IP Related Settings

3.5.1 Addressing

The IP address of the AP can be manually set (Set Manually) or automatically

assigned by a DHCP server on the LAN (Obtain from a DHCP Server). If

users are manually setting the IP address, Subnet mask, and Default

gateway settings, set them appropriately, so that they comply with your LAN

environment. In addition, users can specify the Host name and Domain (DNS

suffix) of the AP.

3.5.2 Static DHCP Mappings

IP addresses of servers are often static so that clients could always locate the

servers by the static IP addresses. By Static DHCP Mappings, users can

ensure that a host will get the same IP address when it requests one from the

DHCP server. Therefore, instead of configuring the IP address of an intranet